SignsBot
- Код
- Документация на английском и немецком
Из инструментов есть робот, управляемый программой, записанной на знаках. Робот требует электропитания, и поэтому работает в комплексе с модом Techage. Также есть датчики и таймер.
Программа управления роботом пишется на своём несложном языке управления, чем-то похожем на язык Turtle/Черепашка
| Основные команды: | |
| move <steps> | go one or more steps forward |
| cond_move | go to the nearest obstacle or sign |
| turn_left | turn left |
| turn_right | turn right |
| turn_around | turn around |
| backward | take a step back |
| turn_off | turn off the robot / back to the box |
| pause <sec> | wait one or more seconds |
| move_up | move up (maximum 2 times) |
| move_down | move down |
| fall_down | fall into a hole/chasm (up to 10 blocks) |
| take_item <num> <slot> | take one or more items from a box |
| add_item <num> <slot> - put one or more items in a box | |
| add_fuel <num> <slot> - put fuel in a furnace | |
| place_front <slot> <lvl> - place the block in front of the bot | |
| place_left <slot> <lvl> - place the block to the left of the bot | |
| place_right <slot> <lvl> - place the block to the right of the bot | |
| place_below <slot> - lift the robot and put the block under the robot | |
| place_above <slot> - set block above the robot | |
| dig_front <slot> <lvl> - remove block in front of the robot | |
| dig_left <slot> <lvl> - remove block on the left | |
| dig_right <slot> <lvl> - remove block on the right | |
| dig_below <slot> - remove block under the robot | |
| dig_above <slot> - remove block above the robot | |
| rotate_item <lvl> <steps> - rotate a block in front of the robot | |
| set_param2 <lvl> <param2> - set param2 of the block in front of the robot | |
| place_sign <slot> - set sign | |
| place_sign_behind <slot> - put a sign behind the bot | |
| dig_sign <slot> - remove the sign | |
| trash_sign <slot> - Remove the sign, clear data and add to the item Inventory | |
| stop - Bot stops until the shield is removed | |
| pickup_items <slot> - pickup items (in a 3x3 field) | |
| drop_items <num> <slot> - drop items | |
| harvest - harvest a 3x3 field (farming) | |
| cutting - cut flowers in a 3x3 field | |
| sow_seed <slot> - see/plant a 3x3 field | |
| plant_sapling <slot> - plant a sapling in front of the robot
pattern - save the block properties behind the sign (3x3x3 cube) as a template | |
| copy <size> - make a 3x3x3 copy of the stored template | |
| punch_cart - bump a mine cart | |
| add_compost <slot> - Put 2 leaves into the compost barrel | |
| take_compost <slot> - Take a compost item from the barrel | |
| print <text> - Output chat message for debug purposes | |
| take_water <slot> - Take water with empty bucket | |
| fill_cauldron <slot> - Fill the xdecor cauldron for a soup | |
| take_soup <slot> - Take boiling soup into empty bowl from cauldron | |
| flame_on | Make fire |
| flame_off | Put out the fire |
| Взаимодействие с Techage: | |
| ignite | Ignite the techage charcoal lighter |
| low_batt <percent> | Turn the bot off if the battery power is below the given value in percent (1..99) |
| jump_low_batt <percent> <label> | Jump to <label> if the battery power is below the given value in percent (1..99) (see "Flow control commands") |
| send_cmnd <receiver> <command> | Send a techage command to a given node. Receiver is addressed by the techage node number. For commands with two or more words, use the '*' character instead of spaces, e.g.:
send_cmnd 3465 pull*default:dirt*2 |
| Управление порядком исполнения: | |
| jump <label> | jump command, <label> is a word from the characters a-z or A-Z |
| <label>: | jump label / start of a function |
| return | return from a function |
| repeat <num> | start of a loop block, <num> is a number 1..999 |
| end | end of a loop block |
| call <label> | call of a function (with return via the command 'return') |
| jump_check_item <num> <slot> <label> | Check if there are <num> items in the chest like node.
-- If not, jump to <label>. -- <slot> is the bot inventory slot (1..8) to -- specify the item, or 0 for any item. |
| jump_low_batt <percent> <label> | See "Techage specific commands" |